Sintered Bronze Bush

Sintered Bronze Bush
Product Introduction:
1.Specification
Product name: Sintered Bronze Bush
Internal Code: NAVI-2-108
Brand: NAVI Titanium®
General Shapes: Round, disc, sheet, tube, bar, cap or customization
Raw materials:
(1)Titanium---0A grade pure powder
(2)Stainless steel---/SS304/SS316/SS316L etc.
(3)Nickel---Nickel base alloys/MONEL/INCONEL/Hastelloy(C22/C276)
(4)Bronze---0A grade pure powder
Advanced fields of NAVI: Electric motors & household appliances etc.
2.Purchasing guide
(1)Process
NAVI Titanium(since 2008) can process according to your design drawings
(2)Sample
Effective, economic, high quality
Only take the basic cost of molds for custom product, Sintering together for sample orders, Zero unqualified
(3)Technology support
Professional one-for-one service, welcome to contact us
Send Inquiry
Description
Technical Parameters

NAVI Titanium supplies sintered bronze bushes for equipment manufacturers, bearing distributors, and OEM buyers seeking self-lubricating components. A sintered bronze sleeve bearing is a porous copper-tin alloy sleeve made by powder compaction and controlled sintering, then impregnated with lubricating oil. Its interconnected pores store oil and release it toward the sliding surface during operation. NAVI Titanium supports discussions covering dimensions, configurations, material requirements, drawings, sampling, and production planning. Buyers can clarify shaft fit, housing fit, speed, load, temperature, and lubrication conditions before confirming specifications.

 

Solution of NAVI Titanium

 

Bronze sinter bushes combine a load-bearing metal framework with interconnected pores that hold lubricant. During shaft movement, operating temperature and pressure encourage oil to migrate toward the contact area, forming a lubricating film. When the component cools, capillary action can draw some oil back into the pores. Performance depends on alloy composition, pore structure, oil type, shaft finish, clearance, load, speed, and temperature. NAVI Titanium can discuss these engineering factors with buyers reviewing drawings and application conditions, helping define measurable requirements rather than choosing by dimensions alone. The following table summarizes product information and specification points buyers may review before requesting a quotation.

 

Sintered Bronze Bush Solution | NAVI Titanium

 

Sintered Bronze Bush Click | NAVI Titanium

 

Common configurations include straight cylindrical bushes, flanged bushes, stepped bushes, and thrust washers. Each shape serves different mounting, positioning, or axial-support requirements. NAVI Titanium can review customer drawings, samples, or dimensional specifications to discuss customized geometries, including inner diameter, outer diameter, length, flange dimensions, and tolerances.

Sintered Bronze Bush | NAVI Titanium
Sintered Bronze Bush | NAVI Titanium
Sintered Bronze Bush | NAVI Titanium

Application

 

Sintered bronze bushes are widely used wherever rotating shafts need compact support and dependable lubrication. Two common markets are electric motors and household appliances, followed by power tools and general industrial machinery. NAVI Titanium can review operating conditions, shaft dimensions, load, speed, and installation requirements to help buyers identify a suitable configuration for their equipment before placing repeat production orders.

Electric Motors and Household Appliances

Electric motors and household appliances are familiar applications for porous bronze sintered bearings. The bush supports a rotating shaft inside a compact housing while its oil-impregnated pores supply lubricant to the sliding interface. This makes it useful in selected fans, small motors, vacuum cleaners, appliance drives, and similar sleeve-bearing mechanisms. For manufacturers, the appeal is straightforward: a compact bearing arrangement can reduce frequent external lubrication and help control noise and friction when correctly specified. Buyers should evaluate shaft diameter, housing fit, radial load, speed, duty cycle, ambient temperature, and lubricant compatibility. NAVI Titanium can review drawings and application details with OEM teams to clarify dimensions and discuss sampling or customized geometries. The final design should be validated under actual operating conditions, because performance depends on clearance, shaft finish, alignment, lubrication, and heat dissipation. Correct matching supports stable assembly and consistent operation across production batches for appropriately specified compact industrial equipment assemblies.

Sintered Bronze Bush Electric Motors | NAVI Titanium
Sintered Bronze Bush Industrial Machinery | NAVI Titanium

Power Tools and Industrial Machinery

Power tools and industrial machinery use powder metallurgy bronze bushings in rotating mechanisms where a compact, oil-impregnated bearing can simplify lubrication. Examples include drills, grinders, gear motors, office machines, and equipment assemblies. The bush provides a bearing surface between a moving shaft and its housing, while stored oil helps reduce direct metal contact. Not every power tool or industrial machine is suitable: impact loading, vibration, high temperatures, contamination, and demanding duty cycles may require another bearing material or lubrication design. Before quotation, teams should share shaft and housing dimensions, load direction, speed range, operating temperature, working cycle, and service conditions. NAVI Titanium can assess drawing-based requirements, discuss manufacturable shapes, and coordinate sample evaluation once the production route is confirmed. For repeat orders, agreed inspection criteria and approved samples help maintain dimensional consistency. The selected bush should be tested in the intended assembly to verify fit, friction, temperature rise, and service performance.

Purchasing guide

Sintered Bronze Bush Purchasing | NAVI Titanium

Quality control (QC)

 

NAVI Titanium supports its sintered metal product activities with an ISO 9001-certified quality management system. For oilite bronze bushing inquiries, buyers can request inspection records and documents. Click the COA button to view a sample Certificate of Analysis and review typical quality information. Documents are for reference only; actual records depend on the confirmed product, inspection plan, and order requirements.

Sintered Bronze Bush COA | NAVI Titanium

Click to download

Manufacturing Process

 

The manufacturing of a sintered bronze bush involves several interconnected stages. Each stage contributes to the final component's mechanical properties, dimensional accuracy, and oil-retention performance.

Manufacturing Stage

Process Description

1. Raw Material Selection

Select bronze powder with suitable composition and particle characteristics.

2. Powder Blending

Mix metal powders to achieve the specified material formulation and uniformity.

3. Powder Compaction

Compress the prepared powder in dedicated tooling to form the required bush geometry.

4. Sintering

Heat the compacted component under controlled conditions to bond metal particles and develop the porous structure.

5. Sizing and Finishing

Adjust critical dimensions and inspect the component's shape and surface condition.

6. Oil Impregnation

Introduce compatible lubricating oil into the interconnected pores using a suitable impregnation process.

7. Quality Inspection

Check dimensions, density, porosity, oil content, and other agreed characteristics.

8. Packaging and Delivery

Protect finished components and prepare them according to the confirmed order requirements.

Click to read more

Process, Quality & Production Resources

Powder Metallurgy Process Planning

NAVI Titanium approaches sintered metal manufacturing through process planning based on required material characteristics and component geometry. For this copper‑tin alloy sintered liner, powder composition and particle characteristics influence compactability, bonding, density, and the interconnected void network needed for lubricant storage. Powder blending, filling, pressing, and controlled thermal bonding must be considered as a connected process. Mould design also affects wall thickness, allowance margin, and repeatable shapes. Engineers can review technical sketches, target measurements, application requirements, and material information before discussing a feasible manufacturing route. Where liner fabrication is confirmed, parameters and mould sets must be validated for the selected copper‑tin powder system. Experience with other sintered metals does not automatically establish identical settings or production capability for this type of copper‑tin liner. A documented process review aligns expectations, pre‑production validation approval, and manufacturing scheduling.

Sintered Bronze Bush Process | NAVI Titanium
Sintered Bronze Bush Inspection | NAVI Titanium

Product-Specific Quality Inspection

Quality evaluation for these sintered bronze bushes should focus on characteristics affecting fit, lubricant retention, and in‑service behaviour. NAVI Titanium can define an evaluation plan around the agreed technical scope, including inner and outer measurements, length, flange profiles, and permissible deviation ranges. Density and void fraction measurements help assess the interconnected void structure, while retained lubricant checks indicate the fluid held after vacuum infusion. Depending on the design and evaluation plan, additional checks may cover material composition, hardness, surface condition, visual defects, and specimen functional behaviour. Tests should use suitable methods and documented acceptance criteria; no test should be claimed as completed without the corresponding equipment and records. For original equipment collaborators, approving a reference specimen and recording critical measurements supports repeat run stability. Engineers can discuss evaluation requirements before fabrication so purchasing, engineering, and quality teams share expectations. 

Established Sintered Metal Manufacturing Resources

NAVI Titanium operates an established sintered metal product line with four powder pressing lines, two vacuum furnaces, and one belt furnace. Its current monthly output of approximately 40,000 elements refers to existing sintered filter elements, not these copper‑tin liners. This distinction matters when partners assess supply capacity: copper‑tin liner fabrication requires separate review of powder formulation, moulding, pressing, thermal bonding, lubricant infusion, profile finishing, and evaluation. Engineers can discuss forecast demand, product mix, sketch complexity, specimen quantities, and delivery frequency. After confirming feasibility and the fabrication route, the team can discuss delivery timelines, run scheduling, packaging, and repeat run controls. For recurring requirements, a documented technical scope and approved specimen provide a basis for production coordination. Rather than applying filter‑element capacity to these liners, NAVI Titanium aims to establish commitments from verified product‑specific capability and the actual delivery schedule.

Sintered Bronze Bush Manufacturing | NAVI Titanium

Core Advantages of Sintered Bronze Bush

 

The following table outlines the functional advantages of the sintered bronze bush. Actual in‑service behaviour depends on composition, void architecture, infused fluid, assembly clearance, mating surface finish, applied loading, rotational velocity, ambient thermal level, and duty cycle. NAVI Titanium recommends confirming these conditions during technical review. This information is for general understanding only, not a guaranteed technical scope for every design or operating environment. Check the final technical scope.

Core Advantage

Working Characteristics

Customer Benefits

Self-Lubrication

Internal pores store and supply lubricating oil.

Reduces the need for frequent external lubrication.

Low Friction

An oil film forms between the shaft and bearing surface.

Helps reduce friction and wear.

Reduced Maintenance

Stored lubricant supports normal operation.

Simplifies routine maintenance.

Quiet Operation

Stable lubrication reduces direct metal contact.

Helps control operating noise.

Compact Structure

A sleeve-bearing design fits into limited installation spaces.

Supports compact equipment designs.

Batch Production Suitability

Powder metallurgy supports repeatable component manufacturing.

Benefits OEM and volume purchasing.

Customizable Geometry

Different bush configurations can be produced using suitable tooling.

Supports equipment-specific requirements.

FAQ
 
 

Q1. How should I maintain this fluid‑infused copper‑tin sintered liner, and how long can it serve?

+

-

Avoid excessive thermal exposure, particulate contamination, and incompatible fluid chemistries. Service duration depends on running environment, applied loading, rotational velocity, and servicing arrangement. Proper specification matching helps extend reliable running performance.

Q2. How do I select the correct sizing to replace an existing copper‑tin liner?

+

-

Provide mating shaft diameter, housing bore, liner length, and technical sketches or reference specimens. We can review measurements and discuss suitable replacement outlines.

Q3. What quality standards, certificates, and evaluation records can international project partners request?

+

-

NAVI Titanium runs a management system certified to ISO 9001. Partners can request material documentation, dimensional evaluation records, void fraction, density, retained fluid records, and applicable compliance paperwork.

Q4. Can you provide adapted liners, stable run‑to‑run consistency, and suitable delivery arrangements for large‑volume supply?

+

-

Yes. Adapted outlines and sizing can be discussed using sketches or reference specimens. Minimum supply quantity, fabrication timeline, run stability, packaging, and shipment terms are confirmed per project.

Q5. How can I confirm compatibility with my equipment and obtain technical support before supply commitment?

+

-

Share equipment details, mating part measurements, applied loading, rotational velocity, and thermal range. We can review your requirements, assess fit compatibility, and discuss reference specimens and technical documentation.

 

Hot Tags: sintered bronze bush, China sintered bronze bush manufacturers, suppliers, factory, coarse pore metal filter cartridge, micron rated sintered porous metal filter, porous metal filter core, sintered metal filter sheet, sintered metallic filter media, Sintered Porous Metal Filter

Send Inquiry