NAVI Titanium presents the Talaria X3 titanium bolt kit, a complete drop-in fastener set engineered from Grade 5 Ti-6Al-4V titanium to directly replace the stock steel bolts on the Talaria X3 (XXX) electric dirt bike, offering OEM-grade fit with no drilling or modification. For dealers, workshops, and riders, NAVI Titanium kit brings roughly 40% weight savings that lighten chassis and rotating mass, outstanding corrosion and seizure resistance for muddy and wet riding, and striking anodized finishes that upgrade the bike's looks.
Solutions of NAVI Titanium
Every NAVI Titanium titaniumbolt kit is built on advantages that matter on the trail and in the showroom. Each bolt is precision-engineered from Grade 5 Ti-6Al-4V with rolled threads for superior fatigue and vibration resistance, so fasteners hold torque through aggressive off-road riding. Direct 1:1 bolt-on fit means no grinding or re-tapping, cutting install time for workshops and DIY riders. Salt-spray and pull-test samples are inspected before shipping to guarantee seizure-free long-term service, cutting warranty and rework costs for resellers. Flexible full-kit and split-kit options suit any buying model. To see how titanium outperforms steel and stainless steel on weight, corrosion, and strength, refer to the table below.
The kit from NAVI Titanium features two primary head styles: cylinder socket cap bolts (DIN912) for frames, covers, and body panels, plus flange hex or Torx-head bolts for brake calipers, sprockets, and suspension links. Every bolt can be customized by drawing-any length, diameter, thread pitch, or head design-for made-to-order shapes tailored to your application.
Application
The titanium bolt kit is engineered for riders and builders who demand mass reduction, longevity, and a premium appearance without compromising safety. Replacing oxidizing steel hardware with the aerospace alloy strengthens every fastening point while cutting mass and eliminating bound-up pieces. Below are the two most common applications where NAVI hardware delivers measurable performance, reliability, and visual upgrades.
Talaria X3 Electric Dirt Bike Full-Vehicle Upgrade
The most common use of the NAVI Titanium Talaria X3 titanium bolt kit is a full-vehicle upgrade on the Talaria X3 (XXX) electric dirt bike itself. Enthusiasts strip out the stock carbon-steel hardware and refit every fastening point-frame, motor mounts, battery cover, controllers, chain guards, and side panels-with Grade 5 titanium for an immediate weight reduction of about 40%. This drop in mass improves handling, suspension response, and acceleration feel, which is critical for riders tackling technical trails, jumps, and muddy terrain. Titanium also brings unmatched corrosion resistance, so bolts never rust or seize after repeated water crossings, pressure washing, or coastal salt exposure. For appearance-focused owners, NAVI Titanium offers anodized colors-blues, purples, gold, and black-that turn functional hardware into a visual centerpiece. Because every bolt is 1:1 OEM matched, installation is a simple bolt-on job requiring no modification, making this the quickest, highest-impact reliability and styling upgrade for the X3.
Talaria Sting MX3/MX4 Platform Compatible Upgrade
A second common application is refitting compatible models on the same Talaria platform, especially the Sting MX3 and MX4 electric motocross machines. Because these models share the same frame architecture and hole layout, the NAVI fastener set fits them directly, letting one set serve an entire family of popular electric off-road two-wheelers. Service bays, racing teams, and electric-motocross retail partners use it to uniformly refit brakes, sprockets, suspension links, and body panels across their fleets, achieving consistent mass reduction and a professional, coordinated look. In competitive riding, the alloy's higher cyclic-load strength and vibration resistance keep critical pieces tight and reliable under sustained off-road stress, reducing the risk of loose hardware mid-race. The weather-proof surface also means the set survives sloppy races and wet storage without oxidation, cutting upkeep time between events. For sellers, stocking one multi-fit set reduces inventory complexity while expanding compatibility messaging to MX3 and MX4 owners.
Purchasing guide
Quality control (QC)
NAVI Titanium's production facility holds ISO 9001 registration, and each batch is examined to confirm alloy grade, threading quality, and clamping performance. To fully demonstrate our strict quality assurance system, the following inspection reports are presented for reference only. Click the button below to request the complete Certificate of Analysis for your order.
Titanium Bolts Manufacturing Process
Every NAVI Titanium Talaria X3 titanium bolt kit starts with certified aerospace-alloy bar stock, chosen for its high strength-to-mass ratio and verified by material certificates to guarantee consistency across every batch. From this raw material, each blank is cut and machined to production-verified dimensions on precision computer-controlled equipment, ensuring the exact length, diameter, and head geometry that matches the Talaria X3 mounting layout.
Next, threading is formed using a rolling process rather than cutting. Rolled threading compresses the grain structure of the alloy, producing a smooth, continuous root that resists cyclic loading and vibration far better than cut threading - critical for the high-stress, sustained-shock environment of off-road riding. After threading, each NAVI piece undergoes deburring and cleaning to remove any surface defects before surface treatment.
For appearance and added protection, pieces can be finished in their natural metallic hue or through electrochemical coloring, which creates a hard, weather-resistant oxide layer available in silver, gold, blue, purple, and rainbow hues, as well as black physical-vapor-deposition coating. Finally, every production lot passes dimensional checks, hardness and pull tests, and saline-mist sampling. Only after passing NAVI's ISO 9001 quality gates are the pieces sorted, packed, and labeled for shipment, giving customers a fastener set that is factory-consistent part after part.
Click to read more
Specification Reference Table
Choosing the right hardware material is critical for performance and longevity. To simplify your decision, NAVI has prepared the table below, comparing aerospace-alloy hardware with carbon steel and stainless steel on mass, weather resistance, cyclic-load strength, and appearance. Please note this data is provided for reference only; actual performance may vary with grades, environments, and usage conditions.
| Item | NAVI Titanium Grade 5 Ti-6Al-4V | Stock Carbon Steel | 304 Stainless Steel |
|---|---|---|---|
| Weight | Around 40% lighter | Heavy | Medium |
| Corrosion Resistance | Excellent, no rust in muddy or saltwater environments | Easy to rust and seize | Good, prone to rust spots after long salt spray exposure |
| Fatigue & Vibration Resistance | Outstanding, reliable under continuous off-road vibration | Poor, easy to strip or break under long-term vibration | Average |
| Surface Finish | Raw titanium / multi-color anodized, premium modification look | Galvanized, prone to dark rust stains | Bright metallic finish with limited color options |
| Cost | Higher (premium upgrade) | Lowest | Medium |
Why Choose NAVI Titanium
Precision-Matched Factory-Blueprint Geometry
The NAVI Titanium Talaria X3 titanium bolt kit is produced from the Talaria X3 production drawing, with every shaft length, thread count per inch, and countersink angle verified against the original mounting layout. This exact alignment lets riders and service bays install the hardware straight out of the box, with no grinding, re-threading, or drilling required, removing the seating problems common to generic aftermarket hardware. Because dimensions are held to production-tolerance limits, each fastener seats properly and clamps down evenly, preserving the structural soundness of the chassis and attached components. This accuracy also protects resellers: fewer returns and fit complaints, higher customer satisfaction, and stronger repeat business. And because the same frame architecture is shared with compatible models, the NAVI set extends that production-grade fit to an entire family of electric off-road two-wheelers, giving one precisely engineered product broad, confident compatibility.
Modular Purchasing Options - Individual Pieces or One Complete Package
NAVI recognizes that buyers have different needs, so the fastener set is offered in flexible configurations to match any purchasing model. Customers can choose a whole-vehicle package covering the entire machine in one box, ideal for owners and service bays performing a comprehensive upgrade, or they can purchase sub-assemblies - cockpit, brake caliper, chassis, sprocket, and suspension groups - so riders only buy the hardware they actually need and keep costs down. For distributors and retail partners, NAVI supports ordering loose individual pieces for restocking the fast-moving sizes or for custom builds, providing supply-chain flexibility that stock-only suppliers cannot match. This modular structure also simplifies inventory planning, reduces dead stock, and lets sellers offer tiered price points from budget upgrades to premium packages. Whether you need one set or bulk volume, NAVI tailors the configuration, packing, and labeling to your operation.
Broad Color Range - Function Plus Personal Styling
The NAVI Titanium Talaria X3 titanium bolt kit shows that performance and appearance can go hand in hand. Beyond the natural raw metal look, NAVI offers a wide range of electrochemically colored options - electric blue, purple, gold, rainbow, and black physical-vapor-deposition coating - that transform ordinary hardware into a striking visual feature of the machine. Electrochemical coloring not only delivers vibrant, long-lasting hue but also forms a hard oxide layer that further improves weather and wear resistance, so the set stays beautiful through sloppy rides and repeated washing. This customization is a major draw for the social-media-driven modding community on visual platforms, where riders showcase their builds and buyers increasingly choose hardware by its look. For sellers, offering multiple colorways creates upsell opportunities and shareable content that drives traffic and conversions. With NAVI, you get production-grade reliability, roughly two-fifths less mass, and the styling freedom to make every build uniquely yours.
FAQ
1. Will this set fit my Talaria X3, and which other models does it cover?
+
-
The NAVI Talaria X3 fastener set is machined to the Talaria X3 (XXX) production mounting layout. It is also compatible with the Talaria Sting MX3 and MX4, which share the same frame and hole pattern, so one set covers the full family of popular electric off-road two-wheelers.
2. How long do the fasteners last, and what upkeep do they need?
+
-
The aerospace-alloy hardware is highly resistant to weather and cyclic loading, so the set typically outlasts the machine itself. Unlike steel, it will not oxidize or bind, so upkeep is minimal - just keep threads clean, re-apply anti-seize or threadlocker if preferred, and re-clamp to spec after the first few rides.
3. How do I install the set, and what clamping force should I use?
+
-
Installation is a direct swap with no modification required. Use the provided clamping-force reference table and tighten each piece to the factory specification in a consistent order to avoid uneven loading. A calibrated wrench is recommended for critical chassis, brake, and suspension hardware.
4. Are the colored options durable, and can I mix or order custom hues?
+
-
Yes. NAVI's electrochemical coloring creates a hard oxide layer that resists scratching, weathering, and fading through regular riding and washing. You can choose single-hue sets or mix colorways, and custom hues and black physical-vapor-deposition coating are available on request.
5. Is the set certified, and do you provide quality documents for customs and buyers?
+
-
NAVI's factory holds ISO 9001 certification. Each batch is inspected, and we can provide material certificates and a Certificate of Analysis for your order, which also helps smooth customs clearance and builds buyer confidence.
Hot Tags: talaria x3 titanium bolt kit, China talaria x3 titanium bolt kit manufacturers, suppliers, factory
